USB-1608G

 

16 Bit USB-Messmodul

HIGHLIGHTS

Das USB-Messmodul USB-1608G bietet preisgünstige präzise Messdatenerfassung mit hohen Abtastraten und eignet sich für Applikationen mit niedriger bis mittlerer Kanalzahl. Flexible digitale I/O und Zählerfunktionen erlauben den Einsatz in multifunktionellen Anwendungen.

ANALOG Eingänge
Kanäle Auflösung Max. Abtastrate
16 SE/8 DIFF 16 Bit 250 kS/s
Erfassung Messbereiche Isolation
Multiplexer ±10 V, ±5 V, ±2 V, ±1 V
ANALOG Ausgabe
Kanäle Auflösung Ausgaberate
Digital I/O
Kanäle Counter/Timer Enkoder
8 2 / 1
Software Power
Betriebssysteme Treiber Versorgung
Windows®, Android™ und Linux® Universal Library™ SW Suite über USB

Artikelnummer Beschreibung Menge Preis
USB-1608G Messmodul mit 16 SE/8 DIFF analogen Eingängen, 16 Bit Auflösung, 250 kS/s Abtastrate, 8 Digital I/O, 2 Zähler, 1 Timer 405,00 € *
Software
DAQami™ V4.2.1 DAQ Data Acquisition Companion Software für Messdatenerfassung und Signalausgabe
45,00 € *
DASYLab® LITE Standardsoftware der Messtechnik. DASYLab Lite enthält die kompletten Treiber, eingeschränkt bei Analyse und Anzahl der Module, eine Layout-Seite
Weitere...
500,00 € *
DASYLab® BASIC enthält alle Treiber und Standard-Module (außer Signalverarbeitung und Aktion) und bietet eine Layout-Seite 1.290,00 € *
DASYLab® FULL enthält alle Treiber und Standard-Module, unterstützt 200 Layout-Seiten und Ablaufsteuerung 1.795,00 € *
DASYLab® PRO beinhaltet alle Treiber, den Funktionsumfang von DASYLab Full und zusätzlich alle Add-On-Module (ohne Module von Drittherstellern) 2.535,00 € *
DASYLab® RUNTIME ermöglicht es, vorhandene Schaltbilder auf einem weiteren PC auszuführen (eine kompatible Hardware-Konfiguration vorausgesetzt) 450,00 € *
TracerDAQ® Pro Virtuelle Instrumente out-of-the-box, mit Linienschreiber, Oszilloskop, Funktionsgenerator und Taktgenerator – Version Professional
182,00 € *
* Preise zzgl. 19% MwSt.

Produkt-Bewertungen


4.8 / 5
Bedienbarkeit
4,5 / 5
Kosten/Nutzen
4,8 / 5
Technischer Support
4,7 / 5

97% der Bewertungen empfehlen dieses Produkt


USB-1608G
September 09, 2020
Quality product / Great price!

I have 3 of these DAQ cards. You cannot beat the price and the functionality of this DAQ card - 16 single-ended analog channels and 8 DIO. These cards have performed stellar in all of the experimental setups. In fact, we have one card that is consistently being rotated between different experimental setups with ease. Thanks for a great product at such an excellent price!

  • Beruf: Biomedical Researcher
  • Branche: Biomechanics
  • Anwendung:
  • Von: Rochester, MN
  • Firmengröße: 5000*
  • Software: NI LabView

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)

USB-1608G
September 09, 2020
Easy to Use, Flexible Integrations

The product performs well--easy to use and having the provided C software functions made it easy to integrate into our workflow.

  • Beruf: Senior Engineer
  • Branche:
  • Anwendung:
  • Von:
  • Firmengröße: 5000*
  • Software: C++/C#/VB

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)

USB-1608G
September 08, 2020
Pleased, would buy again

Application involved sending a microsecond long, high-current pulse into a stretched wire. We purchased this DAQ to measure two amplified photodiode signals in the vertical and horizontal directions as well as a current shunt. I initially chose this unit for its Python capabilities, as there was a somewhat involved control software being developed in Python. It took a little while to get started, but with some patience (< 1 day) I was able to use a digital signal to initiate external processes and to trigger the unit itself for high-speed measurements. The analog signal measurement quality was very good. Good product and good value, and tech support always got back to me quickly. Just be a little patient when getting going if you plan on using the UL library.

  • Beruf: Scientist
  • Branche: government research
  • Anwendung: pulsed wire magnetic measurement apparatus
  • Von: Berkeley, CA
  • Firmengröße: 1001-5000
  • Software: Python

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)

USB-1608G
September 24, 2019
Good function for the cost

I have used the USB-1608G for quick proof of concept testing. When it works its great.

  • Beruf: Engineer
  • Branche: Agriculture
  • Anwendung: Testing
  • Von: Peoria, IL
  • Firmengröße: 101-500
  • Software: DASYLab

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (1) / Nein (0)

USB-1608G
September 24, 2019
Simple and Efficient

Very easy to setup and get working without much hassle.

  • Beruf: Senior Engineer
  • Branche:
  • Anwendung:
  • Von:
  • Firmengröße: 5000*
  • Software: MATLAB

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (1) / Nein (0)

USB-1608G
September 24, 2019
Will work with any single

This product works very well as an interface with any type of single I am using Dataforth 5b modules with there backplane and can collect 16 channels of data for a reasonable price point

  • Beruf: Lab manager
  • Branche: Automotive
  • Anwendung: Durability testing
  • Von: Rochester Hills MI
  • Firmengröße: 1001-5000
  • Software: DASYLab

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (1) / Nein (0)

USB-1608G
April 22, 2019
Excellent product, very easy to connect to Analog to igital peripherals.

This simple USB analog to digital devise has been invaluable to our business. We are able to attach multiple analog instruments and gracefully collect important data for later analysis. The Measurement Computing team is always available for advise and problem solving. I strongly recommend this product for anyone interested in analog to digital data collection.

  • Beruf: CEO
  • Branche: Medical Analysis
  • Anwendung: Workers Compensation and Sports Injury Analysis
  • Von: Point Pleasant, NJ
  • Firmengröße: 1-100
  • Software: Other

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (1) / Nein (0)

USB-1608G
Januar 02, 2018
Excellent product for all kind of research activities

Excellent product for all kind of research activities. We are using this product continuously for our research work for couple of years and its working fine without any issues more than 2 years, Quite impressed with this product performance. Highly recommend to all my R&D team for their needs. Worth for the price.

  • Beruf: Architect
  • Branche: High Voltage Engineering
  • Anwendung: Circuit Breaker testing
  • Von: Atlanta, GA
  • Firmengröße: 1-100
  • Software: MATLAB

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (1) / Nein (0)

USB-1608G
Mai 01, 2017
Nice feature with affordable price

This product has good PC integration and more accuracy rate. Perfect for my R&D work

  • Beruf: Architect
  • Branche: High voltage engineering testing
  • Anwendung: R&D
  • Von: Portland, OR
  • Firmengröße: 1-100
  • Software: MATLAB

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (1) / Nein (1)

USB-1608G
April 17, 2017
This product's documentation and quality is excellent.

I am very happy with my purchase of the USB-1608G DAQ. It was my first time purchasing a DAQ, and the documentation was very helpful. It was very easy to use with LabVIEW, and the ULx VI software is very good. I will recommend this product and this company in the future.

  • Beruf: Research Student
  • Branche: Academics
  • Anwendung: Impact force measurement
  • Von: Austin, TX
  • Firmengröße: 1-100
  • Software: NI LabView

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)




We had to use voltage dividers to knock down the voltage to the allowable measuring range but now we see a slight offset, likely due to the dividers not being perfect. Is there a way to balance these during calibration?

  • Job Title: Engineer
  • Industry:
  • Application:
16 months ago
Lbarret


Antworten

Unfortunately no, there is no built in feature to re-balance the differential measurement high and low during calibration.

16 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

I can´t get Instacal to recognize a plugged 1608GX device. The device manager displays the DAS component but there is an exclamation mark next to the device name and the following message appears: "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)". I tried disabling integrity checks but the problem remains. Running Windows 7 Ultimate x64. Any solutions?

  • Job Title: Sound engineer
  • Industry:
  • Application:
24 months ago
Alex Argentina


Antworten

Beginning with InstaCal/Universal Library version 6.60, MCC has enhanced its driver signing (SHA-256). If you are installing on Win7-32 or Win7-64, and if your Windows 7 is not up-to-date, we recommend that you fully run Windows Update prior to installation of our drivers.

24 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

  • Job Title: Engineer
  • Industry: Automotive
  • Application: Testing
33 months ago
ZJAG Detroit MI


Antworten

Unfortunately there is no DIN rail mount option for this size plastic case. The unit is light, and so Velcro could be used on the bottom of the plastic case (though field wiring could add weight). You could remove the PCB from the plastic case, revealing 4 mounting holes. You could mount the PCB on standoffs. Here is a link to a mechanical drawing: https://www.mccdaq.com/pdfs/drawings/USB-1608G-Series.pdf

33 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

I got a USB-1608G from a coworker, but there is no enclosure. Can these be purchased separately?

  • Job Title: Communications Engineer
  • Industry: Acoustics
  • Application: Acoustic calibration sampling
52 months ago
Con1234 Boston, MA


Antworten

We offer two versions of the USB-1608G Series products. The USB-1608G (w/enclosure and screw terminals) and the USB-1608G-OEM (no enclosure and headers). Unfortunately, there is no enclosure available for the -OEM version since the enclosure used on the USB-1608G version would not give access to the headers to allow for signal connections.

52 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

Dear Sir, I tried to generate installer for my labview program based on NI recommendation which can be found @ http://kb.mccdaq.com/KnowledgebaseArticle50609.aspx when I try to install in a PC which does not have both labview and Instacal, the program start well, but not find USB-1608G hardware. even it does not power up the DAQ. What can I do? Regards,

  • Job Title: Electrical Engineeer
  • Industry: Technology
  • Application: Electric Meter
61 months ago
AI AA


Antworten

In that FAQ, the created application installer is asked to install our InstaCal driver set. But the end-user must still manually run InstaCal (the user must launch inscal32.exe) so that the USB-1608G hardware is assigned a board number (usually board # 0). If the user cannot locate the file named inscal32.exe, then the InstaCal driver set was not installed properly by your installer.

61 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

When I open and close the labview project I get "Dependency loaded from new path & .NET assembly changed" warnings. I can not generat .exe and installer for the project.

  • Job Title: Electrical Engineer
  • Industry: Technology
  • Application: Electric Meter
61 months ago
AI AA


Antworten

These warnings are because we saved/distribute our VIs in an older version of LabVIEW than you are developing in. Simply re-save the VIs, and then the next time you open your project, you will not get these warnings.

61 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

How is the analog ground/analog inputs isolated from the digital ground (and USB shield)? Are they shorted or is there a true isolation between them?

  • Job Title: Design engineer
  • Industry:
  • Application:
61 months ago
eebike


Antworten

The USB-1608G series provides no ground isolation. The analog and digital circuits each have their own ground planes. This helps with noise reduction in the circuits. However, they eventually come to a single point connection under the ADC. Measurement Computing does offer DAQ products with isolation. Please contact us at 1-800-234-4232 Ext-3 to discuss the options.

61 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

Dear Sir, How can I use DAQ Assistant for USB-1608G. Where can I find it? Regards,

  • Job Title: Electrical Engineer
  • Industry: Technologies
  • Application: Electric Meter
61 months ago
AI AA


Antworten

Unfortunately, DAQ Assistant will only work with National Instrument’s LabVIEW and NI DAQ products. For help with programming your LabVIEW application using our ULx drivers for LabVIEW, please refer to our KnowledgeBase article “Getting Started with LabVIEW and ULx” here: http://kb.mccdaq.com/Search.aspx?Keywords=Getting%20started%20with%20LabVIEW.

61 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

Hi, I'd like to know how one can realize a burst measurement of n<16 channels with Labview and ULx. The ULx help doesn't even mention the burst mode which was proclaimed in the datasheet.

  • Job Title: research engineer
  • Industry:
  • Application:
65 months ago
drr


Antworten

Burstmode is not a setting/choice that is supported by ULx. However, specific to the USB-1608G series, note that when external clock mode is used, it mimic burstmode (i.e. all enabled channels are sampled once per clock pulse). So, if you want to use the on-board (internal clock), then the workaround is to instead wire the timer output of the unit over to its external clock input, specify external clock for the AI, and then start the timer output (using ULx’s counter output VIs) at the desired sample rate.

65 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

The Retrigger Mode distinguishes the USB-1608G from similar devices e.g. USB-1608FS-Plus. The datasheet of USB-1608G says the Trigger Input is digital but below it states that the Retrigger Mode is sensitive to analog trigger events. Does that mean I can connect an analog trigger source to the TRIG input and set the sampling time via the trigger count such, that each time the a rising edge is detected at the TRIG input, the measurement is done?

  • Job Title: Student
  • Industry:
  • Application: Triggered Sampling
66 months ago
joe546 Bavaria


Antworten

The trigger on the USB-1608G series accepts only TTL level, digital input (0 to 5 volt logic). The portion of the data sheet that I believe you are referring to describing the “Retrigger” feature… “In retrigger mode, you can set up repetitive analog input trigger events” is referring to the digital trigger event starting your “Analog Input Scan” so as to capture an analog event, triggered by the TRIG input. Unfortunately, you cannot connect an analog trigger signal. However, the “Retrigger” feature will work the way you have described below in that the trigger will rearm itself and wait for the next DIGITAL trigger event to occur to start another acquisition. Excerpt from the ULHELP: Retriggering Use RETRIGMODE with AInScan() to set up repetitive trigger events. Use the ConfigItem option BIADTRIGCOUNT with cbSetConfig() to set the A/D trigger count. When using RETRIGMODE, set the values for the Count argument (cbAInScan()/AInScan()) and the BIADTRIGCOUNT argument (cbSetConfig()/SetAdRetrigCount()) to an integer multiple of the number of channels in the scan. That way, the entire buffer, or the portion of the buffer defined by BIADTRIGCOUNT, will contain updated data.

66 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

  • Job Title: instructor
  • Industry: Computer Tech.
  • Application:
69 months ago
bduman


Antworten

The USB-1608G is not directly compatible with 4-20 mA signals. It lacks the necessary signal conditioning. However, with the use of a low cost, precision 249 ohm resistor placed across the USB-1608G’s +-5 volt differential inputs you can easily create a current shunt which will produce a 1-5 volt drop across the shunt. With 1 volt equal to 4 mA and 5 volts equal to 20 mA.

69 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

  • Job Title: Senior Sensor Architect
  • Industry:
  • Application:
70 months ago
lightyear66 Folsom, CA


Antworten

The USB-1608G is a multiplexed DAQ device using a single A/D converter. If you need a simultaneous DAQ device, please take a moment to review the following products: USB-1608FS-Plus, USB-1608HS, USB-1602HS, or the USB-1604HS DAQ device.

70 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (3) / Nein (0)

I have USB-1608GX-2AO DAQ device which I am using with Datawave (Dwavetech.com) Experimenter Workbench. I want to use the Digital I/O to output TTL- like pulses to an Arduino board . When I use the Experimenter Workbench object for digital output to speci

  • Job Title: Lab Instructor
  • Industry: Neuroscience Research/ Education
  • Application: Electrophysiology/Optogenetics
86 months ago
smilway Memorial University of Newfoundland


Antworten

You can test the digital output function by running the InstaCal Analog Loopback test. Close your 3rd party program before launching InstaCal – then you choose which digital output bit for it to toggle, and you wire (loopback) it to an analog input channel. You should see a square wave on the screen. The amplitude of the digital output is not adjustable. If the digital output toggles properly in InstaCal, then the issue is with your 3rd party program.

86 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (0) / Nein (0)

  • Job Title:
  • Industry:
  • Application:
86 months ago
EEwannabe Calif


Antworten

Hello - I believe you are referring to NI’s SignalExpress. MCC’s ULX driver is not compatible with SignalExpress. ULx is compatible with the traditional LabVIEW graphical programming environment.

86 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (0) / Nein (1)

I need to measure an analog signal between 5 and 6 volts that needs to be accurate to 0.001 volt. Can the 1608G do this?

  • Job Title: Electrical Engineer
  • Industry:
  • Application:
88 months ago
Rhan Massachusetts, USA


Antworten

Hello - The USB-1608G will not meet your accuracy requirement of 0.001 volts. The stated accuracy for the +- 10 volt input range is 4075 uV (4.075 mV) and for the +- 5 volt input range is 2266 uV (2.266 mV). To attain a 0.001 volt accuracy you would have to use one of our 24 bit DAQ devices. Like the USB-2404-10. http://www.mccdaq.com/products/product-listing.aspx?oid=1596&r=24 but please do not confuse accuracy with resolution. If you need 0.001 volts of resolution then the USB-1608G will work just fine. Your resolution for the +- 10 volt range would be 0.000305 volts/LSB. I have added a link below to a Knowledge-Base whitepaper on accuracy and resolution. Please do not hesitate to contact MCC with any additional questions. http://kb.mccdaq.com/KnowledgebaseArticle50043.aspx?Keywords=Accuracy

88 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (1) / Nein (0)

  • Job Title: University renewable energy Innovation department
  • Industry: University renewable energy Innovation department
  • Application: Acquiring temperature data for electrolyzer project
101 months ago
Xamoso Spain


Antworten

No. The thermocouple generates a tiny voltage, and even with a 24 bit DAQ there is not enough voltage range on the thermocouple to measure it directly with the USB-1608G. Alternatives are to make a thermocouple pre-amplifier to boost the voltage up to a level where it can be directly read by the DAQ. Also DAQs that do measure thermocouples have internal pre-amplifiers, like the USB-2408 Series DAQ. The DAQs that do measure thermocouples also have an internal reference thermocouple.

94 months ago
zmonkey

War diese Antwort hilfreich? Ja (0) / Nein (0)

You should get a USB-TC or USB-TEMP for that. They are designed for reading thermocouples, and give temperature directly. Unlike the USB-1608g they compensate for the temperature-dependent voltage drop due to the mismatch between the terminal on the DAQ and the thermocouple wire.

100 months ago
Noxsc

War diese Antwort hilfreich? Ja (2) / Nein (0)

The USB-1608G was not designed to read thermocouples directly. It lacks 3 things needed: very high gain/amplification, cold junction compensation circuitry, and low pass filtering. Instead choose a product designed with thermocouples in mind, such as the USB-TC or USB-2408.

101 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (0) / Nein (0)

Mitgelieferte Software


  • TracerDAQ® - Erfassung, Anzeige und Speicherung von Messdaten, sowie Signalgenerierung
  • InstaCalTM - Tool für Installation, Konfiguration und Test der Messgeräte
  • Universal Library - Enthält die Unterstützung für Visual Studio® und Visual Studio®.NET, sowie Beispiele für Visual C++®, Visual C#® und Visual Basic®.NET
  • ULx for NI LabVIEWTM - Sammlung von VIs und Beispielprogrammen für eine schnelle Anwendungsentwicklung mit NI LabVIEW
  • Universal Library for Android® - umfasst Unterstützung und Beispiele für die Android 3.1 Plattform (API Level 12) und folgende
  • Linux® - Open Source Unterstützung für MCC-Messgeräte
  • MATLAB® Support für MCC-Geräte - Schnittstelle zu MATLAB® von The MathWorks®
  • Python™ Unterstützung für die MCC DAQ Messgeräte

Kostenpflichtige Softwareoptionen


  • DAQamiTM - Einfach zu bedienende Software zur Messdatenerfassung und Signalausgabe
  • DASYLab®2020 - interaktiv PC-basierte Messtechnik-Applikationen entwerfen ohne Programmierkenntnisse einfach durch Verbinden von Funktionsblöcken
  • TracerDAQ®Pro - Out-of-the-box Sammlung von Virtuellen Instrumenten mit Linienschreiber, Oszilloskop, Funktionsgenerator und Taktgenerator – Professional Version

Handbücher


USB-1608G
USB-1608G.pdf
 

 

Quick Start Anleitung


DAQami™ V4.2.1
QS-MCCDAQ.pdf
 
DASYLab® LITE
QS-DASYLab-MCCDRV.pdf
 
ULx for NI LabVIEW™
QS ULx for NI LabVIEW.pdf
 

 

 

Programmierbeispiele      download

 

Videos


MCC Videothek
Videothek
 

 

1 Jahr Garantie

1 Jahr Garantie

Alle Produkte sind mit einer 1-jährigen Garantie ausgestattet.

30 Tage Geld zurück

30 Tage
Rückgabe

Wenn Sie mit Ihrem Produkt nicht zufrieden sind, geben Sie es innerhalb von 30 Tagen zurück.

Live Hilfe

Die richtige Auswahl

Welches Produkt passt am besten auf Ihre Anforderungen?
Fragen Sie unsere Ingenieure im Vertrieb.