Passwort vergessen?
Konto erstellen
+49 7142 9531-0
Laden...
Die Open Source Bibliothek für C/C++ und Python ermöglicht die Anwendungsentwicklung für MCC DAQ HAT Module für den Raspberry Pi unter Linux.
Enthält Quellcode und Beispiele
Verfügbar zum Download auf GitHub https://github.com/mccdaq/daqhats .
Do drivers support labview via linx on raspberry pi
Hello - No support for LabVIEW is available, nor is currently planned. MCC’s driver has support for C/C++ and Python only.
War diese Antwort hilfreich? Ja (1) / Nein (0)
I am trying to install a MCC118 onto a raspberry Pi 3. during the stage of running the "mcc118_firmware_update 0 ~/daqhats/tools/MCC_118.hex" I get the response "Error entering the bootloader"
"Error entering the bootloader” is what you see if you have the jumper set for board 1 (for example) and you call “mcc118_firmware_update 0 MCC_118.hex”. The “0” would need to be changed to agree with your address jumper. If you changed the jumper position (or plan to), be sure to power down. After the jumper is set to the desired position, power on (i.e. boot), then run sudo daqhats_read_eeproms (per installation instructions), then run mcc118_firmware_update 0 MCC_118.hex (per the installation instructions).
War diese Antwort hilfreich? Ja (0) / Nein (1)
Alle Produkte sind mit einer 1-jährigen Garantie ausgestattet.
Wenn Sie mit Ihrem Produkt nicht zufrieden sind, geben Sie es innerhalb von 30 Tagen zurück.
Welches Produkt passt am besten auf Ihre Anforderungen? Fragen Sie unsere Ingenieure im Vertrieb.
Thank you for your review submission. We will send you an email when your review is posted.
Thank you for submitting your question. We will send you an email once your question has been posted.
Thank you for submitting your answer. We will send you an email once your answer has been posted.