USB-2020

12-Bit, 20 MS/s, Ultra High-Speed USB-Messkarte mit simultaner Erfassung

HIGHLIGHTS

Die Messkarte USB-2020 erfasst die zwei analogen Eingänge mit bis zu 20 MS/s pro Kanal. Die Messdaten werden in einen 64 MSample großen Speicher auf der Karte geschrieben oder können über USB mit bis zu 8 MS/s kontinuierlich übertragen werden. Die Karte bietet flexible Trigger-Optionen, sowie digitale I/O.

Analog Eingänge
Kanäle Auflösung Max. Abtastrate
2 SE 12 Bit 20 MS/s/Kanal
Erfassung Messbereiche Isolation
simultan ±10 V, ±5 V, ±2 V, ±1 V
Analog Ausgabe
Kanäle Auflösung Ausgaberate
Digital I/O
Kanäle Counter/Timer Enkoder
8
Software Power
Betriebssysteme Treiber versorgung
Windows® und Linux® Universal Library™ SW Suite Extern, 9-18 V


Artikelnummer Beschreibung Menge Preis
USB-2020 Ultra High-Speed USB-Messkarte mit 2 simultanen analogen Eingängen, 2x 20 MS/s Übertragungsrate in den internen Speicher, analoge und digitale Trigger, Taktgeber und digitale I/O. 1.015,00 € *
Zubehör & Kabel
PS-9V1AEPS230V Ersatz-Steckernetzteil 230 VAC, 9 VDC Ausgang, für SwitchAndSense-8/8, USB-2020, USB-ERB08, USB-PDISO8, USB-PDISO8/40, USB-SSR08, USB-SSR24, WebDAQ - austauschbare länderspezifische Stecker müssen separat bestellt werden
Weitere...
28,00 € *
Australia Plug Austauschbarer Stecker Australien für Steckernetzteile 10,00 € *
Europe Plug Euro-Stecker für Steckernetzteile mit austauschbarem Stecker 10,00 € *
UK Plug Austauschbarer Stecker Großbritannien für Steckernetzteile 10,00 € *
US Plug Austauschbarer Stecker US für Steckernetzteile 10,00 € *
C40FF-50 40-poliges Flachbandkabel, Buchsenstecker an beiden Enden, Länge ca. 15 m
Weitere...
177,00 € *
Software
DAQami™ V4.2.1 DAQ Data Acquisition Companion Software für Messdatenerfassung und Signalausgabe
48,00 € *
DASYLab® LITE Standardsoftware der Messtechnik. DASYLab Lite enthält die kompletten Treiber, eingeschränkt bei Analyse und Anzahl der Module, eine Layout-Seite
Weitere...
500,00 € *
DASYLab® BASIC enthält alle Treiber und Standard-Module (außer Signalverarbeitung und Aktion) und bietet eine Layout-Seite 1.290,00 € *
DASYLab® FULL enthält alle Treiber und Standard-Module, unterstützt 200 Layout-Seiten und Ablaufsteuerung 1.795,00 € *
DASYLab® PRO beinhaltet alle Treiber, den Funktionsumfang von DASYLab Full und zusätzlich alle Add-On-Module (ohne Module von Drittherstellern) 2.535,00 € *
DASYLab® RUNTIME ermöglicht es, vorhandene Schaltbilder auf einem weiteren PC auszuführen (eine kompatible Hardware-Konfiguration vorausgesetzt) 450,00 € *
TracerDAQ® Pro Virtuelle Instrumente out-of-the-box, mit Linienschreiber, Oszilloskop, Funktionsgenerator und Taktgenerator – Version Professional
193,00 € *
* Preise zzgl. 19% MwSt.

Bewertungen




Can I use this device to measure phase delay?

  • Job Title: science
  • Industry:
  • Application:
14 months ago
andrew4010


Antworten

Hello, The channels on the USB-2020 are synchronized to the “Samples” and not the “Phase”. The USB-2020 supports simultaneous sampling and can be used to measure the phase delay between two channels.

14 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

  • Job Title: Software Engineer
  • Industry:
  • Application:
16 months ago
mickstadt


Antworten

Yes, The digital I/O can be read and written to while performing an analog scan. Placing the analog scan in “Background” & “Continuous” mode will immediately return control to your program allowing you to read/write to the digital I/O while continuing to collect analog data in the background.

16 months ago

War diese Antwort hilfreich? Ja (1) / Nein (0)

I understand from the USB-2020 description that the board comes with drivers for Linux. Is there a Linux based C API similar to Universal Library?

  • Job Title: Research Scientist
  • Industry:
  • Application:
34 months ago
bog Durham, NC


Antworten

Yes, many of our USB DAQ devices have Linux support including the USB-2020. To be clear, our Linux support is not included on the MCC DAQCD that ships with the product but can be downloaded from our web site here: ftp://lx10.tx.ncsu.edu/pub/Linux/drivers/USB/ Please download the MCCLIBUSB.1.09.tgz. Once downloaded and compiled you can run the included example program for the USB-2020 to get started. MCC currently, does not have a C based Linux API library.

34 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (1)

Still looking for a way to get away from the PCI slot, which is slowly going away. We now use the above card connected via. a 37 pin cable. i see you offer a 37 to 40 pin cable for this. I know Measurement Computing was working on a USB replacement, might this be an option?

  • Job Title: Field Service
  • Industry: Food/Beverage
  • Application: Gauging data equation
43 months ago
Wally Lancaster, OH


Antworten

Hello Wally, Our USB-DIO24/37 is a pin/connector compatible USB alternative. One possible caveat is that the speed of the USB-DIO24/37 is much slower than its PCI counterpart. If speed is of essence here then please consider using our PCIe-DIO24 product which is also pin/connector compatible. You can review these products at the following links: http://www.mccdaq.com/usb-data-acquisition/USB-DIO24-Series.aspx and http://www.mccdaq.com/pci-data-acquisition/PCIe-DIO24.aspx

43 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (1)

Why does the User's Manual say, "only use MCC plug-in power supply - MCC p/n CB-PWR-9"? The input power is specified as 9V to 20V. To insure the 2020 is powered before applying voltage to the analog inputs requires control of the 2020 power supply. The USB-2020 appears to be designed to embedded. but uses a separate supply. This isn't really compatible with with being embedded and having a restriction on the analog input voltage. Hence, my question. The "Absolute maximum input voltage" of the analog inputs is specified as "+/-15V max (power on). What is the maximum power off analog input voltage [without damage]?

  • Job Title: Electronic Engineer
  • Industry:
  • Application:
45 months ago
Scott Moorpark, CA


Antworten

Hello Scott - The note in our manual about the power supply is indeed confusing. We do plan to change that note soon. You can use your own power supply if you wish. The DC range of your power supply should be within the range of 9V to 20V. In the Off state there is no over-voltage protection. If none of your signals/sensors can source > 20 mA, then there should be no concerns. But if higher current can be sourced, then you should disconnect signals/sensors before powering down the USB-2020.

45 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

Are the analog input grounds isolated from the USB ground?

  • Job Title: Electronic Engineer
  • Industry: Aerospace and Defense
  • Application: data acquisition
45 months ago
Scott Moorpark, CA


Antworten

The USB-2020 provides no isolation between the field wiring and the USB interface. Our USB-1602HS device (although it’s not as fast as the USB-2020) supports two 16 bit analog inputs with a sample rate of 2 MS/sec/channel and offers the isolation that you are looking for. The USB-1602HS supports 500 VDC minimum isolation between field wiring and USB interface. You can review the specifications here: http://www.mccdaq.com/usb-data-acquisition/USB-1602HS.aspx

45 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

Is this device still incompatible with matlab???

  • Job Title: Undergraduate
  • Industry: Electronics
  • Application:
46 months ago
kicom Sri Lanka


Antworten

MCC is pleased to announce that MathWorks has recently released MATLAB R2017a (64 bit version) which now includes support for MCC devices. For additional details please visit our web site at http://mccdaq.com/daq-software/MATLAB-Support.aspx or call us at 1-800-234-4232 Ext-3.

18 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

The USB-2020 is currently not supported under MATLAB’s Data Acquisition Toolbox. We are working towards adding support for newer USB products. Unfortunately, we do not have a time frame just yet for this device.

46 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (2) / Nein (0)

For our application, we need to acquire data in fixed size sample blocks at 20MS/s using an external trigger. Ideally, we would like to set up the triggering and sample count per block once, then stream the blocks of data back to the PC while the device c

  • Job Title:
  • Industry:
  • Application:
52 months ago
azenk


Antworten

Thank you for your inquiry. What you are describing below sounds very much like our “BURSTIO” mode. When using BURSTIO you acquire data from the USB-2020 on 1 or 2 channels at maximum rate of 20MS/s per channel to the USB-2020’s internal memory (64 MS). The data is then read from the FIFO and transferred to the PC buffer. The acquisition can be started by a software command or via an external trigger. Please feel free to contact Sales Engineer to further discuss your application.

52 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (1) / Nein (0)

I want to receive two Analog signals in two parallel channels and save them to computer in digital mode. I need them to be a continuous signals without any cut for at least 20s. F.Y.I, each signal sampling rate is around 15MS/s. so, do you think it is pos

  • Job Title: phd
  • Industry:
  • Application:
58 months ago
Asem Malaysia


Antworten

There is not yet MATLAB support for the USB-2020 from The Mathworks. But the main factor here, given your throughput needs of 30M samples/second, is that the USB-2020 (in continuous mode) is limited to 8M. The PCI-DAS4020/12 would meet your needs.

58 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (1) / Nein (0)

  • Job Title: Sr. Engineering Tech.
  • Industry: Consumer
  • Application:
58 months ago
Rod999


Antworten

Thanks for your interest in our USB-2020. For the first version of the USB-2020, MCC decided to stay with USB 2.0. We realize that USB 3.0 offers the ability to continuously stream full-rate data to host computers and are looking at this technology for future revisions of the product. Please let MCC know if you have an application for this feature - we always want to be market driven.

58 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (1) / Nein (0)

Mitgelieferte Software


  • TracerDAQ® - Erfassung, Anzeige und Speicherung von Messdaten, sowie Signalgenerierung
  • InstaCalTM - Tool für Installation, Konfiguration und Test der Messgeräte
  • Universal Library - Enthält die Unterstützung für Visual Studio® und Visual Studio®.NET, sowie Beispiele für Visual C++®, Visual C#® und Visual Basic®.NET
  • ULx for NI LabVIEWTM - Sammlung von VIs und Beispielprogrammen für eine schnelle Anwendungsentwicklung mit NI LabVIEW
  • Linux® - Open Source Unterstützung für MCC-Messgeräte
  • MATLAB® Support für MCC-Geräte - Schnittstelle zu MATLAB® von The MathWorks®
  • Python™ Unterstützung für die MCC DAQ Messgeräte

Kostenpflichtige Softwareoptionen


  • DAQamiTM - Einfach zu bedienende Software zur Messdatenerfassung und Signalausgabe
  • DASYLab®2016 - interaktiv PC-basierte Messtechnik-Applikationen entwerfen ohne Programmierkenntnisse einfach durch Verbinden von Funktionsblöcken
  • TracerDAQ®Pro - Out-of-the-box Sammlung von Virtuellen Instrumenten mit Linienschreiber, Oszilloskop, Funktionsgenerator und Taktgenerator – Professional Version

Handbücher


USB-2020
USB-2020.pdf
 

 

Quick Start Anleitung


DAQami™ V4.2.1
QS-MCCDAQ.pdf
 
DASYLab® LITE
QS-DASYLab-MCCDRV.pdf
 
ULx for NI LabVIEW™
QS ULx for NI LabVIEW.pdf
 

 

Videos


MCC Videothek
Videothek
 

 

Programmierbeispiele      download

1 Year Warranty

1 Jahr Garantie

Alle Produkte sind mit einer 1-jährigen Garantie ausgestattet.

30 Day Money Back Guarantee

30 Tage
Rückgabe

Wenn Sie mit Ihrem Produkt nicht zufrieden sind, geben Sie es innerhalb von 30 Tagen zurück.

Live Help

Die richtige Auswahl

Welches Produkt passt am besten auf Ihre Anforderungen?
Fragen Sie unsere Ingenieure im Vertrieb.