USB-1024 Serie

 

24-Kanal Digital I/O-Module für 5V TTL-Signale

HIGHLIGHTS

Die Digital I/O-Module der USB-1024 Serie sind zur Überwachung und Steuerung von 24 digitalen 5V TTL-Signalen ausgelegt. Die Kanäle sind portweise (3x 8 Bit oder 2x 8 und 2x 4 Bit) als Ein- oder Ausgänge konfigurierbar. Eine Version mit High-Drive Ausgängen (15 mA source, 64 mA sink) ist verfügbar. Die Geräte besitzen einen Ereigniszähler und benötigen keine zusätzliche Versorgung, die Verbindung zum USB genügt. Der Anschluss der digitalen Signale erfolgt bequem über die integrierten Schraubklemmen.

Digital I/O
Kanäle Counter/Timer Enkoder
24 1 / —
Software Power
Betriebssysteme Treiber Versorgung
Windows® und Linux® Universal Library™ SW Suite über USB


Artikelnummer Beschreibung Menge Preis
USB-1024LS 24-Kanal Digital I/O USB-Modul
86,00 € *
USB-1024HLS 24-Kanal, High-Drive Digital I/O USB-Modul (15 mA source, 64 mA sink, 365 mA total sink)
183,00 € *
Software
DAQami™ V4.2.1 DAQ Data Acquisition Companion Software für Messdatenerfassung und Signalausgabe
48,00 € *
DASYLab® LITE Standardsoftware der Messtechnik. DASYLab Lite enthält die kompletten Treiber, eingeschränkt bei Analyse und Anzahl der Module, eine Layout-Seite
Weitere...
500,00 € *
DASYLab® BASIC enthält alle Treiber und Standard-Module (außer Signalverarbeitung und Aktion) und bietet eine Layout-Seite 1.290,00 € *
DASYLab® FULL enthält alle Treiber und Standard-Module, unterstützt 200 Layout-Seiten und Ablaufsteuerung 1.795,00 € *
DASYLab® PRO beinhaltet alle Treiber, den Funktionsumfang von DASYLab Full und zusätzlich alle Add-On-Module (ohne Module von Drittherstellern) 2.535,00 € *
DASYLab® RUNTIME ermöglicht es, vorhandene Schaltbilder auf einem weiteren PC auszuführen (eine kompatible Hardware-Konfiguration vorausgesetzt) 450,00 € *
TracerDAQ® Pro Virtuelle Instrumente out-of-the-box, mit Linienschreiber, Oszilloskop, Funktionsgenerator und Taktgenerator – Version Professional
193,00 € *
* Preise zzgl. 19% MwSt.

Produkt-Bewertungen


4.7 / 5
Bedienbarkeit
4,8 / 5
Kosten/Nutzen
4,8 / 5
Technischer Support
4,5 / 5

96% der Bewertungen empfehlen dieses Produkt


USB-1024LS
Oktober 15, 2018
Low cost and powerfull

USB-1024LS is low cost digital IO but powerful and has high channels count . Very easy to install and use . you can use it also with SSR for high current switching application.

  • Beruf: Engineer
  • Branche: Industrial Solutions
  • Anwendung: Control System
  • Von:
  • Firmengröße: 1-100
  • Software: NI LabView

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (1) / Nein (0)

USB-1024HLS
Juni 18, 2018
Simple easy to use digital IO

Simple easy to use digital IO. Simple to set up, wiring is straight forward. Just works.

  • Beruf: Designer
  • Branche:
  • Anwendung:
  • Von: Chicago, IL
  • Firmengröße: 501-1000
  • Software: DAQami

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)

USB-1024LS
Oktober 30, 2017
Better Products on the Market

The customer service was excellent insuring I get the configuration that I need and making note. I have since ordered a few more of these.

  • Beruf: Buyer
  • Branche: Manf. of RF devices and testing devices
  • Anwendung:
  • Von: Greensboro NC
  • Firmengröße: 1001-5000
  • Software: C++/C#/VB

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)

USB-1024LS
Juni 26, 2017
Exactly what I need

Very good value and easy to integrate with Matlab. I use it for behavioral experiments to synchronize timing between events during behavioral tasks and physiological data recordings.

  • Beruf: academic research
  • Branche:
  • Anwendung:
  • Von: United States
  • Firmengröße: 1-100
  • Software: MATLAB

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)

USB-1024LS
März 18, 2017
Works great with Excel VBA

I was looking for a Digital I/O that I could program with Excel VBA. With a little syntax help from tech support, I was able to send discrete binary output (program #) and read a discrete input response from a vision sensor. EXCELENT reliability and control. I will get some more for other applications. I also want to try the analog I/O device.

  • Beruf: Manufaturing Engineer
  • Branche: manufacturing
  • Anwendung: MSExcel interface
  • Von: Forest City NC
  • Firmengröße: 101-500
  • Software: C++/C#/VB

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)

USB-1024LS
März 06, 2017
Works perfect but.......

Works perfect but knowledge of programing is needed if you elect not to use their software. Never could get the examples in VB 2005 to work. After several hours of frustration it turns out to be simpler in VB 2015 then in 2005 to program. One you setup initializing the board and ports takes two lines to talk to it. I have tried several other I/O boards and couldn't be more pleased with the USB-1024LS. One board I purchased (I wont say who) never would work, the supplied DLL would never work. Contacted tech support and they said they never tested or attempted to test in VB but said it "Should" work, well it doesn't! They say in their item description it does. OK I am done venting, back to the USB-1024LS. I am using the USB-1024LS talking to 4 other boards to control servos, motors, LED's and various other components. Highly recommend it!

  • Beruf: Retired
  • Branche:
  • Anwendung: HO Model Railroading
  • Von: Georgia
  • Firmengröße: 1-100
  • Software: C++/C#/VB

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)

USB-1024LS
Februar 27, 2017
Great Value

Great value / short lead time or stock

  • Beruf: Sr Sourcing Buyer
  • Branche: ElectroMechanical Manufacturing
  • Anwendung: Hardness Testing
  • Von: Largo, FL
  • Firmengröße: 5000*
  • Software: DAQami

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)

USB-1024LS
Dezember 12, 2016
Easy to use

I used this product for an array of sink type IR LED light barriers and the lab view integration worked smoothly. Thanks

  • Beruf: Engineering student
  • Branche: Mechanical engineering
  • Anwendung: Senior project
  • Von: Sioux center, IA
  • Firmengröße: 1-100
  • Software: NI LabView

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)

USB-1024LS
September 19, 2016
simple to use

Extremely simple to integrate into c++ code. Excellent technical support. The only downside - it is slow. We are getting 7us pulses w/native C commands.

  • Beruf: Researcher
  • Branche:
  • Anwendung:
  • Von: Rutgers U
  • Firmengröße: 5000*
  • Software: C++/C#/VB

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)

USB-1024LS
März 14, 2016
Great product!

We have shipped about 100+ units and our techs have no issues installing or configuring them. We typically use 1024ls

  • Beruf: IP Video Specialist
  • Branche: Security
  • Anwendung: Door Contacts usb1024ls
  • Von: Broomall PA
  • Firmengröße: 101-500
  • Software: TracerDAQ

  • Bedienbarkeit
  • Kosten/Nutzen
  • Technischer Support
Ja, ich empfehle dieses Produkt!

War diese Bewertung hilfreich? Ja (0) / Nein (0)




Can I read inputs from the device using a CMD line interface in a batch file?

  • Job Title: Senior Manager
  • Industry: Automotive
  • Application: Windows SW trigger
DVZ Auburn Hills, MI


Antworten

Hello - The USB-1024LS does not support a CMD Line interface. A program is required to communicate with the device.

1 days ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

Good Morning, I plug the usb cable and start InstaCal. At this time, Instalcal find the PMD1024 and all looks OK. Then, I restart windows, wait 1 min, and restart instacall. Now Instacal tell me that there is a board defined in CB.CFG but not found it. I check the windows device manager and the PMD is well recognized in windows. Someone have an idea ?

  • Job Title: R&D Engineer
  • Industry:
  • Application:
6 months ago
Stef59 FRANCE


Antworten

HID devices are recognized very slowly on some newer Windows PCs. Try waiting longer after a re-boot. If you are using a USB or USB distance extension scheme, try without it. By referring to it as a PMD, that implies that it is very old (perhaps 15 years) … maybe you have moved on to a newer PC with USB 3.0 (try USB 2.0). If the LED is on solid, then this usually means proper enumeration. Check for duplicate copies of CBW32.DLL and CB.CFG on the hard drive, including in hidden folders.

6 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

2 USB-1024LS are used on 1 computer to control 2 channels of motor control at the same time. Unfortunately they cross talking. Two VB application programs to run them respectively. When the 2nd program starts while the 1st one is in use, the 2nd 1024LS interferes with the 1st 1024LS. Any idea why?

  • Job Title: Engineer
  • Industry: Automation
  • Application: Automation
10 months ago
Kevin AZ USA


Antworten

This is a result of our UL for Windows driver. Only one application program (process) that calls the Measurement Computing driver can be running at a time, although multiple threads within that application can call the Measurement Computing driver.

10 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

Is there a library for Python and can it be used on Raspberry Pi?

  • Job Title: Engineere
  • Industry:
  • Application:
33 months ago
Mg1234 Singapore


Antworten

Currently, there is no Python support available for our products. The good news is that we do have Linux drivers that will allow you to use the USB-1024LS with a Raspberry pi. Please review our Tech Tip on using MCC hardware with a Raspberry pi. The tech tip can be accessed here: http://mccdaq.com/TechTips/TechTip-9.aspxis

33 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

The manual states that a resistor can be changed to switch from pull up to pull down but does not state how. Do you have any documentation on doing this? Is this disassemble and unsolder and resolder the resistor?

  • Job Title: Systems Engineer
  • Industry:
  • Application:
46 months ago
djg MD


Antworten

Changing the digital I/O power up state does require disassembly and the de-soldering/soldering of a zero ohm shunt resistor. Please refer to our knowledge Base article for instructions on how this is done. http://kb.mccdaq.com/KnowledgebaseArticle50452.aspx?Keywords=USB-1024LS

46 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

  • Job Title: PhD student
  • Industry: sport science
  • Application: Measuring anticipation time
51 months ago
DMDX United Kingdom


Antworten

Our USB-1024LS is not compatible with the DMDX software application. However, I did find that the APDM wearable sensors that you are looking to use and control do have a Software Developer’s Kit (SDK) that supports MATLAB, C and Linux. With that said, our USB-1024LS also has support for MATLAB, C and Linux as well so it may be possible to develop a program using both SDKs from APDM and MCC.

51 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

We have (2) USB-1024LS I/O devices connected to a Win7 Pro PC. Boards are configured as board 0 and board 1 thru InstaCal. Inputs are configured as (24) digital inputs. When connected separately, each board works correctly thru TraceDAQ. a0 is input 0 a1 is input 1 ... b0 is input 8 ... c0 is input 16 ... c7 is input 23 However, when both boards are connected, the inputs on board 0 get offset by 2: a0 is input 2 a1 is input 3 ... b0 is input 10 ... c0 is input 18 ... c5 is input 23 c6 is input 0 c7 is input 1 What are we doing wrong? How can we correct it?

  • Job Title: tech support
  • Industry: IT
  • Application: Digital I/O counting
55 months ago
nickdobrinich Cleveland OH


Antworten

We have tried this same setup, and it works OK. But we do see a possible cause for what you report. If you used the “AutoFill All” feature to add all 24 “Di” bits of each board, it may also have added a 25th channel, counter channel “Ci0”. This would cause the channels on the second board to shift one spot (not the two spots you report). To prevent this, before selecting AutoFill All, first select “Digital Input Only” rather than “All Supported”. If you still have an issue, please contact our Tech Support department, and they can review your .SCC configuration file and/or provide you with theirs.

55 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

  • Job Title: Engineer
  • Industry:
  • Application:
56 months ago
Pan


Antworten

Hello Pan - the USB-1024LS is not 3.3v compliant, but our PCIe-DIO24H is. You can review the specifications here: http://www.mccdaq.com/pci-data-acquisition/PCIe-DIO24.aspx

56 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

  • Job Title: Test Engineer
  • Industry: Automotive
  • Application:
56 months ago
Bill6560 Orlando, FL


Antworten

Yes - A USB Cable, free Software, free tech support and a limited lifetime warranty are all included with the USB-1024LS.

56 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

  • Job Title:
  • Industry:
  • Application:
62 months ago
brett


Antworten

The USB-1024LS supports 24 programmable digital I/O bits and one 32 bit event counter. The event counter would be ideal for this project in that it will count pulses (TTL) up to a 1 MHz input rate and totalize the counts it acquires. There are a couple of options for software. TracerDAQ supports the event counter but is limited to 32K counts. TracerDAQ PRO ($199.00) increases the count total to 1 million samples. If using TracerDAQ the Initial logging is to a binary file with the capabilities of converting the file to a .CSV file for use with Excel. We also include our Universal Library for Windows and our drivers for ULx for NI LabVIEW. Please contact Measurement Computing at 1-800-234-4232 Ext-3 for Sales if you have additional questions.

62 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (0) / Nein (0)

I want to generate clock pulse. Is there any one who know this device can generate clock pulse up to which frequency? I use for loop, sequence and "wait until timer". As I decrease waiting time, frequency only can go to 60 Hz. After that, even though I re

  • Job Title: GRA
  • Industry:
  • Application:
62 months ago
jspark Atlanta, GA, USA


Antworten

The USB-1024LS is not designed for clock pulse generation since your update rate is system dependent. We have posted a Knowledgebase article on this topic at the following link: http://kb.mccdaq.com/KnowledgebaseArticle50176.aspx?Keywords=USB-1024LS My recommendation would be to use one of our USB-CTR Series devices. Both units support up to 4 PWM outputs capable of frequencies up to 48 Mhz. The specifications for the USB-CTR Series may be viewed at the below link: http://www.mccdaq.com/usb-data-acquisition/USB-CTR-Series.aspx

62 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (0) / Nein (0)

  • Job Title:
  • Industry:
  • Application: Quadrature sensor
77 months ago
Roger Billerica, MA, USA


Antworten

UPDATE: New USB-DIO32HS - 32-Bit High-Speed Digital I/O Device from MCC with input and output scans up to 8 MS/s. You can view this Series at: http://www.mccdaq.com/usb-data-acquisition/USB-DIO32HS.aspx

43 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

Roger - can you provide a few more details about what you're trying to do. I'm using the 1024LS in conjuction with a laser photo cell to detect when an object breaks the beam of light. In my case I've wired the photo cell to pins 19 and 20 (the counter), then using a timer in the software to **continually** retrieve the value of the counter. When the counter increments I know the beam has been broken - and I grab the time from the computer. I dont know if that's anywhere near what you're trying to do - but if not, shoot me any details and I might be able to help..

72 months ago
boumaj

War diese Antwort hilfreich? Ja (0) / Nein (0)

Yes by using the DASYLab® or NI LabVIEW you can use this to create an time program for any specific operation as a activate a relay to control any electric device

76 months ago
Clemente12454

War diese Antwort hilfreich? Ja (0) / Nein (0)

Unfortunately, the USB-1024LS cannot be hardware timed. This function is possible with some of our multifunction DAQ boards such as the USB-2500 Series.

77 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (0) / Nein (0)

Are this Digital Device and its drivers/software (instacal) compatible with Intel Atom Z3795 with Windows 8.1 Pro? We have a project to replace all our PCs with Tablets. This tablets must use a USB-1024HLS digital cards and a proprietary software developed by Us. We are considering HP ElitePads 1000 G2 with W8.1 and 4Gb in Ram and also Lenovo's ThinkPad 10 with Intel Atom Z3795 Processor, 4GB LPDDR3 Memory, 128GB eMMC Storage, 64bit OS. We already have some 30 PCs with your Digital I/O cards and a application developed in Delphi XE7.

  • Job Title: Owner
  • Industry: Manufacturing
  • Application: Industrial
51 months ago
FAlvarado El Paso, TX


Antworten

We’ve not tested these particular tablets, but InstaCal is compatible with any PC/tablet running Windows 8.1 PRO. The USB-1024HLS is a USB 1.1 device, and should work fine in the 2.0 port on the Lenova. The HP tablet has only USB 3.0, which you will want to test/confirm compatibility with, as USB 3.0 can vary. We don’t anticipate an issue, since the USB-1024HLS is an HID device and it uses the Microsoft HID driver that comes with Windows.

51 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

How fast can I change a specific digital output state on this module?

  • Job Title: Electrical engineering student
  • Industry: Sherbrooke university
  • Application: Conception of a three -phased signal generator
67 months ago
Myriam Montreal, QC, Canada


Antworten

Hello Myriam - Thank you for your inquiry. The USB-1024LS and USB-1024HLS are software polled devices. Typical access time for an input is approximately 16mSec and for an output about 8 mSec. Below is a link to a knowledge base article that addresses your exact question. http://kb.mccdaq.com/KnowledgebaseArticle50176.aspx?Keywords=USB-1024LS For high speed digital I/O please look to our USB-1616HS series. http://www.mccdaq.com/usb-data-acquisition/USB-1616HS.aspx

67 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (0) / Nein (0)

  • Job Title:
  • Industry:
  • Application:
71 months ago
kevinlee


Antworten

For both models, it is 64 mA per output bit. With the USB-1024HLS model only, there is an overall limit (counting all bits) of 365 mA total.

71 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (0) / Nein (0)

Mitgelieferte Software


  • TracerDAQ® - Erfassung, Anzeige und Speicherung von Messdaten, sowie Signalgenerierung
  • InstaCalTM - Tool für Installation, Konfiguration und Test der Messgeräte
  • Universal Library - Enthält die Unterstützung für Visual Studio® und Visual Studio®.NET, sowie Beispiele für Visual C++®, Visual C#® und Visual Basic®.NET
  • ULx for NI LabVIEWTM - Sammlung von VIs und Beispielprogrammen für eine schnelle Anwendungsentwicklung mit NI LabVIEW
  • Linux® - Open Source Unterstützung für MCC-Messgeräte
  • MATLAB® Support für MCC-Geräte - Schnittstelle zu MATLAB® von The MathWorks®
  • Python™ Unterstützung für die MCC DAQ Messgeräte

Kostenpflichtige Softwareoptionen


  • DAQamiTM - Einfach zu bedienende Software zur Messdatenerfassung und Signalausgabe
  • DASYLab®2016 - interaktiv PC-basierte Messtechnik-Applikationen entwerfen ohne Programmierkenntnisse einfach durch Verbinden von Funktionsblöcken
  • TracerDAQ®Pro - Out-of-the-box Sammlung von Virtuellen Instrumenten mit Linienschreiber, Oszilloskop, Funktionsgenerator und Taktgenerator – Professional Version

Handbücher


USB-1024HLS
USB-1024HLS.pdf
 
USB-1024LS
USB-1024LS.pdf
 

 

Quick Start Anleitung


DAQami™ V4.2.1
QS-MCCDAQ.pdf
 
DASYLab® LITE
QS-DASYLab-MCCDRV.pdf
 
ULx for NI LabVIEW™
QS ULx for NI LabVIEW.pdf
 

 

Videos


MCC Videothek
Videothek
 

 

Programmierbeispiele      download

1 Jahr Garantie

1 Jahr Garantie

Alle Produkte sind mit einer 1-jährigen Garantie ausgestattet.

30 Tage Geld zurück

30 Tage
Rückgabe

Wenn Sie mit Ihrem Produkt nicht zufrieden sind, geben Sie es innerhalb von 30 Tagen zurück.

Live Hilfe

Die richtige Auswahl

Welches Produkt passt am besten auf Ihre Anforderungen?
Fragen Sie unsere Ingenieure im Vertrieb.