DaqBoard/3000USB Serie

Hello Ganguly, We have a local rep in India that can provide you with a quote for this board. Please contact: Foretek Marketing Private Limited #801, 1st Cross, 7th Main H.A.L. Second Stage Bangalore 560 008 Phone: 91 80 2525 4706 Fax: 91 80 2526 6813

War diese Antwort hilfreich? Ja (0) / Nein (0)

Yes, we do have an Ethernet version of the DaqBoard/3001USB. Please take a look at our DAQOEM/2001 board at the below link: http://www.mccdaq.com/products/daqoem2001.htm. Please feel free to contact us at 1-800-234-4232 x3 if you have any questions or to discuss your application further.

War diese Antwort hilfreich? Ja (1) / Nein (0)

Hi Steve - Currently, we have one product, the BTH-1208LS, which offers Bluetooth/wireless communications: http://www.mccdaq.com/wireless-data-acquisition/BTH-1208LS.aspx This does not have as high IO rates as the product you have, but it may fit if it can meet your project specifications.

War diese Antwort hilfreich? Ja (0) / Nein (0)

Hi Jake - The earlier advice was proven out prior to Win7/8 release. Further testing shows the advice does not reliably achieve its goal on Win7/8. This compatibility was not advertised, and MCC does not plan to investigate/correct. If you wish to change from using the IOtech driver to the MCC driver, contact MCC Technical Support for the procedure and cost of returning the board in favor of an MCC branded board.

War diese Antwort hilfreich? Ja (0) / Nein (0)

I have more information. I followed your recommended procedure, of "forcing" a usbdaqlib driver on the VID_0622 device by "Update Driver", followed by "choose from a list of [drivers on the system]". The device shows as "functioning" in Device Manager. I should specify at this point that I am running Windows 8 64-bit. The InstaCal application freezes: 1. if the device is plugged in, on instacal start (task not responding) 2. if the device is not plugged in at instacal start, but only after instacal is up, InstaCal freezes when pressing "Refresh". Hopefully this helps. I am trying to use an IOtech 3031 as an MC 2537. Thanks again.

War diese Antwort hilfreich? Ja (0) / Nein (0)

Dear Measurement Computing: Are you sure about your answer? What I see from examining the result of DAQView installation is a bunch of oemX.inf which bind both the VID_0622 and the VID_09DB to the dax64.sys driver. This suggests that both the iotech brand and mc cards can easily be used with the IOtech drivers / software. What I see on the other side, installing InstaCal and examining the added oemX.inf files is nothing like that. The "usbdaqlib.sys" is only associated with MC-brand, VID_09DB. From here I conclude that it is not quite a symmetric situation and that only mc cards can be easily [if not ] used with the MC software (drivers and UL) Please correct my potential misinformation or misunderstanding. Thank you very much.

War diese Antwort hilfreich? Ja (0) / Nein (0)

Yes, the boards are the same, except for the vendor/device IDs. But these do not have to change. You can use the board with either driver, assuming you installed the desired driver (or even installed both drivers). The drivers get installed with DAQView and InstaCal. Once the hardware is plugged in, let Windows load the driver it chooses … then via the device manager, right click on the device, select “update driver software…”, then select “Browse my computer for driver software”, then select “Let me pick from a list of device drivers on my computer.” You will then see a new dialog box with both the IOTECH DAQBoard/30xxUSB and MCC USB-25xx shown. Select the one you want to use, click ‘Next’ and let it finish installing the selected driver.

War diese Antwort hilfreich? Ja (0) / Nein (0)