MATLAB® Unterstützung für die MCC-Produktlinie

Entwicklungsumgebung für Anwendungen zur Messdatenerfassung und -analyse

MATLAB® Unterstützung für die MCC-Produktlinie

 

 

HIGHLIGHTS

MATLAB® ist eine Entwicklungsumgebung für Anwendungen zur Datenerfassung und -analyse. Unsere kostenfreien Schnittstellen in der Data Acquisition Toolbox™ von The MathWorks® erlauben Anwendern von MATLAB die Steuerung der Messgeräte zur direkten Messwerterfassung und Signalausgabe.

Viele Messgeräte der MCC-Produktlinie unterstützen die MATLAB Data Acquisition Toolbox™

Messdaten mit MCC-Messgeräten erfassen und in Echtzeit nach MATLAB übertragen

Erfasste Messdaten können direkt in den Arbeitsbereich von MATLAB importiert werden zur schnellen und präzisen Analyse und Weiterverarbeitung

Besuchen Sie www.MathWorks.com, wenn Sie mehr zur Unterstützung in der MATLAB Data Acquisition Toolbox erfahren möchten

Unterstützt jetzt MATLAB 64-Bit (ab R2017a) und 32-Bit (vor R2016a)


Sehen Sie unser Video zur analogen Erfassung.
Das im Video verwendete Skript und den Beispielcode finden Sie in unserer Knowledge Base.

Sehen Sie unser Video zur analogen Ausgabe.
Das im Video verwendete Skript und den Beispielcode finden Sie in unserer Knowledge Base.



Artikelnummer Beschreibung Menge Preis
MATLAB® Unterstützung für die MCC-Produktlinie Entwicklungsumgebung für Anwendungen zur Messdatenerfassung und -analyse
* Preise zzgl. 19% MwSt.

Bewertungen




Hi! I thought it must be done with InstCal but it only allows to change the input mode of the channels but not the voltage range. In MatLab it is possible to see the right property after adding the channels but it READ ONLY! With singled ended channels the range is +/- 10V and with differential +/-20V. There is no way to set for example +/- 2.5 V? Thanks, Leo

  • Job Title: Researcher Assistant
  • Industry: University
  • Application: Resaerch
1 weeks ago
leorojasp Germany


Antworten

For the USB-1208FS model, in single-ended mode, the hardware has only one input range (+/- 10V). But in differential mode, there are 8 ranges. Be sure not to have MATLAB and InstaCal open at the same time, in case MATLAB is not picking up the differential setting made in InstaCal. Close both all the way, and open just one or the other. This is the likely cause, since MATLAB has been confirmed to work properly (MATLAB does list 8 input ranges with this DAQ model in differential mode).

1 weeks ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

When using InstaCal, I can configure the scan rate to 10MHz, but in MATLAB the top rate is at 1MHz. Is there a way to increase that?

  • Job Title: System Engineer
  • Industry:
  • Application:
1 months ago
gostdi Pleasanton, CA


Antworten

Hello - That sounds like rate limit decision that needs to be fixed at the sessions driver level, as the hardware can run faster. Please contact The Mathworks to report the issue.

1 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

I am trying to create a program for acquiring data with an MCC USB-1602 device with the session-based approach in Matlab 2017a. I have downloaded Measurement Computings hardware support package. I can create a session and add channels to it. I can use it to gather data. So far everything is ok. The problem is that I cannot add triggers to the session object. When I use the function "addTriggerConnection" I get the following error: "Method 'addTriggerConnection' is not supported on objects of class 'daq.sdk.Session'." When I try to debug, I feel like there are things missing from the vendor specific session subclass. Am I perhaps missing something here?

  • Job Title: Researcher
  • Industry:
  • Application:
4 months ago
/Patrik


Antworten

The Mathworks recently released this driver, and they note on their website that it does not support triggered acquisition. You could contact them to request a timeframe for adding this feature.

4 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

I see from previous answers that MCC is supported in the 2017a version of Matlab. I have this version and still cannot use mcc for the session-based daq toolbox. I attempt to use the "daq.createSession" command in Matlab, but MCC is Not among the supported vendors. Please advise.

  • Job Title: Researcher
  • Industry:
  • Application:
4 months ago
Patrik


Antworten

Hello Patrik, In addition to having MathWorks’ Data Acquisition Toolbox for MATLAB R2017a installed, the user must also download and install the ‘Data Acquisition Toolbox Support Package for Measurement Computing Hardware’ from them: https://www.mathworks.com/hardware-support/measurement-computing.html Also, prior to launching MATLAB R2017a, the MCC daq device must be configured in InstaCal (then keep InstaCal closed).

4 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (4) / Nein (0)

Can the BTH-1208LS be used from Matlab over Bluetooth ?

  • Job Title: Lab Director
  • Industry:
  • Application:
4 months ago
timw Australia


Antworten

Yes, the BTH-1208LS is supported under MATLABs 2017a Data Acquisition Toolbox release.

4 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

I could not find any example for usb 1608 FS to interface with matlab? The provided video seems not right when I input command "analoginput('mcc',0)", the matlab does not recognize the DAQ device. Could you make some tutorials or some source to share with us on how to write DAQ interface using matlab with measurement compution devices? Thanks

  • Job Title: Research Engineer
  • Industry:
  • Application:
9 months ago
Bigfish546 Cleveland, OH


Antworten

The video is valid for the USB-1608FS as well. First, make sure the USB-1608FS is assigned board # 0 in InstaCal. Do not have InstaCal and MATLAB open at the same time. Also make sure you have 32-bit MATLAB (not 64-bit, as it will have a new driver from The Mathworks sometime next year). You will also need to install MATLAB’s Data Acquisition Toolbox.

9 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

Given that Matlab is now 64-bit only, we need 64-bit MCC drivers to be compatible with 64-bit Matlab. Is this in the works? Do you have an ETA? Thanks,

  • Job Title: Sys Admin
  • Industry: Education
  • Application:
17 months ago
Matthew PA


Antworten

MCC is pleased to announce that MathWorks has recently released MATLAB R2017a (64 bit version) which now includes support for MCC devices. For additional details please visit our web site at http://mccdaq.com/daq-software/MATLAB-Support.aspx or call us at 1-800-234-4232 Ext-3.

4 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (1)

The Mathworks is actively developing 64-bit drivers to support MCC products in Matlab version R2016. For more information, or to request support for a specific device please contact the Mathworks at www.mathworks.com/support/contact_us

17 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (6) / Nein (1)

i have the usb 3106 device. I'm trying to use the analog outputs of the device as a current source. Most tutorials online show the generation of waveforms. I'd like to know if i can generate a DC current output similar to the test function on instacal but for application purposes

  • Job Title: technician
  • Industry: electronics
  • Application: testing ADCs
18 months ago
tom546 new york


Antworten

Yes, you can generate a 0-20 mA current output using your USB-3106 for application purposes. First you must set your output range from within InstaCal. You then have to set up the compliance voltage circuit needed to create a 0-20mA signal (see page 16 of the User’s manual). Once this has been done you have a couple of options for controlling your USB-3106. You can use TracerDAQ PRO, DASYLab, ULx for LabVIEW or our Universal Library for .NET.

18 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (1) / Nein (0)

Hi, I have a 1408FS device that I am trying to use with Matlab 2014a (64 bit on Win 7). I had installed all the drivers from the CD provided and checked for the hardware in Instacal. It shows and works fine. But when I do a daq.Getdevices in Matlab it s

  • Job Title:
  • Industry:
  • Application:
35 months ago
dchan


Antworten

MCC is pleased to announce that MathWorks has recently released MATLAB R2017a (64 bit version) which now includes support for MCC devices. For additional details please visit our web site at http://mccdaq.com/daq-software/MATLAB-Support.aspx or call us at 1-800-234-4232 Ext-3.

4 months ago
Measurement Computing

War diese Antwort hilfreich? Ja (0) / Nein (0)

The driver for MATLAB is written and maintained by the folks at The Mathworks. They have yet to add support for 64-bit MATLAB, per the following note on their website: Note: You must use the Legacy interface and the 32-bit version of Data Acquisition Toolbox and MATLAB to use Measurement Computing data acquisition hardware. The 32-bit versions of Data Acquisition Toolbox and MATLAB can be installed on a 64-bit Windows OS.

35 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (4) / Nein (2)

Hi. I want to control current and use full-16bit resolution using MATLAB. In InstaCal, I can change D/A range to 0-20mA so that I can control current. And also, I can give a value of 0 to 65535 so that I can use 16 bit resolution for control output. But i

  • Job Title: Researcher
  • Industry: space dynamics
  • Application: Satellite
36 months ago
EunJi South Korea


Antworten

Hello - The range for each channel on the USB-3100 Series is indeed set in InstaCal. At our library level, values of 0 to 65535 are accepted, with 0 corresponding to minus full scale, and 65535 corresponding to plus full scale. Since you report that MATLAB is assuming the output range is a voltage, then you should be able to send out fractional voltages. You should be able to achieve the desired “current” resolution by requesting to output a voltage with enough significant digits to the right of the decimal point. Four places to the right of the decimal point, i.e. 0.0001 volts, will be more than enough.

36 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (1) / Nein (0)

I want to acquire signal with PMD-1608FS under matlab enviornment. what version of matlab at least is available for PMD-1608FS? Thanks.

  • Job Title:
  • Industry:
  • Application:
40 months ago
ciobowu


Antworten

The MathWorks added support for the USB-1608FS, and its previous name (PMD-1608FS), many years ago. There is a list on The MathWorks’ website which details the version needed (of their DAQ Toolbox) for each supported DAQ model. For USB-1608FS, they list R14SP3+ (version 2.8). For PMD-1608FS, they list R14 (version 2.5).

40 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (1) / Nein (0)

Hello, Why, when i try to use data acquisition with mcc (usb-1208FS-Plus) with Data Acquisition Toolbox with Matlab i have this message as answer : Warning: Board not found in mwmcc.ini file. Board is not supported but may work. When my command is daq.get

  • Job Title: Research Engineer
  • Industry: Research
  • Application: Data acquisition
42 months ago
alquier IMFT Toulouse


Antworten

Hello Alquier - The Mathworks added official support for the USB-1208FS-PLUS in their R2013b release. Advice from The Mathworks on how to use it in an earlier version is posted here: http://kb.mccdaq.com/KnowledgebaseArticle50474.aspx

42 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (0) / Nein (6)

Since i want to control the voltage of output analog channel by matlab program through USB in real time, may i know the response time and update speed from matlab program to the analog channel?? is it the update speed equal the 100KS/s?? how long do the

  • Job Title: engineer
  • Industry: electronic
  • Application: contorl system
48 months ago
freeman hk


Antworten

Hi Freeman - Be sure not to confuse the USB-3101FS with the USB-3101, since they are quite different. The USB-3101 hardware can only be updated at a rate of 100 Hz divided by the number of channels used. MATLAB likely can keep right up with this slow rate. The 100 KHz USB-3101FS model is not supported by the Mathwork’s DAQ Toolbox for MATLAB.

48 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (2) / Nein (0)

how can i read the analog input from USB-1208FS in MATLAB and and run some process by using analog output and how i can using the digital input/out put by using data acquisition toolbox in matlab2008b thank you

  • Job Title:
  • Industry:
  • Application:
51 months ago
riyAD Palestinian Territories


Antworten

Hello riyAD - If the board is listed properly in InstaCal, then you should contact The Mathworks for support of MATLAB and their Data Acquisition Toolbox.

51 months ago
MeasurementComputing

War diese Antwort hilfreich? Ja (0) / Nein (17)

Videos


Analog Input Application

Analog Output Application


MATLAB Supported Products    

Data Translation 32-Bit Support    

Data Translation 64-Bit Support    

1 Year Warranty

1 Jahr Garantie

Alle Produkte sind mit einer 1-jährigen Garantie ausgestattet.

30 Day Money Back Guarantee

30 Tage
Rückgabe

Wenn Sie mit Ihrem Produkt nicht zufrieden sind, geben Sie es innerhalb von 30 Tagen zurück.

Live Help

Die richtige Auswahl

Welches Produkt passt am besten auf Ihre Anforderungen?
Fragen Sie unsere Ingenieure im Vertrieb.